Step 1 — Enter Programming Mode

Press and hold the Hexavent Programming Button for 3 seconds until the indicator light starts flashing. The controller is now ready for configuration. 

Step 2 — Select Your Paddle

Press and hold the paddle you want to customize. Keep holding it during the assignment process. 

Step 3 — Assign a Function

While holding the paddle, press the button you want to assign. The selected function is now linked to the paddle. 

Step 4 — Confirm the Assignment

Release both the paddle and the button. The indicator light will confirm that the programming was successful. 

Step 5 — Optimize Your Gameplay

Use your new paddle configuration to access critical actions instantly without removing your thumbs from the analog sticks, improving speed, consistency, and control. 

Step 6 — Reset or Reconfigure Anytime

To remove a single assignment, enter Configuration Mode, hold the paddle, and press the Programming Button once. To restore factory settings, hold the Programming Button for approximately 10 seconds to clear all assignments.